MIXER BOARD

Topic: MIXER BOARD (Read 6763 times) previous topic - next topic

MIXER BOARD

2024-10-09 11:05 am

This tool: MIXER BOARD opens a mixer board, which contains, for each staff, various controls to change following properties:

Stereo Pan, Volume, Muted, Midi Channel, Instrument Name and Patch, Predefined Instruments

Changing the Stereo Pan and Volume can be done by:

grabbing and moving the handle of the slider
clicking on the slider: changes the value +- 10
pressing PgUp or PgDn: changes the value +-10
pressing the arrow keys: changes the value +-1

Changing the instrument can be done by:

changing the Instrument Name; if the new name is present in the set of 'Predefined Instruments', the Patch will also be changed.
changing the Patch; it will also change the instrument name
clicking the button 'Predefined Instruments' and selecting an instrument.

Installation:

Download the file, unzip it and copy the its full path name
Open any file in NoteWorthy Composer
Go to 'Tools/User Tool' or press Alt-F8
Click 'New...'
Choose a group or create a naw one
Fill the Name field: 'Mixer_board'
Fill the command line: the full path name of the unzipped file
Input Type: File Text
Options:
- Returns File Text
- Long Task Handling

Re: MIXER BOARD

Reply #1 – 2024-10-09 11:54 am

Hi Gust,
downloaded and installed, but no joy. Please see attached .png file for error message.

I don't know if it makes a difference, but I installed it into my scripts folder, under the folder where NWC2.exe lives. This being historically where all scripts were installed way back when... NB I have full permissions to this location.
When I created the new tool and put the full path in the "Command" field NWC decided to strip off everything except the relative parts of the path. I.E. "Scripts\mixer_board-1.0.exe"

Re: MIXER BOARD

Reply #2 – 2024-10-09 12:26 pm

I am also getting a similar error as Lawrie.

Re: MIXER BOARD

Reply #3 – 2024-10-09 12:49 pm

Quote from: Lawrie Pardy – 2024-10-09 11:54 am

Hi Gust,
downloaded and installed, but no joy. Please see attached .png file for error message.

I don't know if it makes a difference, but I installed it into my scripts folder, under the folder where NWC2.exe lives. This being historically where all scripts were installed way back when... NB I have full permissions to this location.
When I created the new tool and put the full path in the "Command" field NWC decided to strip off everything except the relative parts of the path. I.E. "Scripts\mixer_board-1.0.exe"

Hi Lawrie,
That error occurs when reading the instrument tree.
Can you send me the itree file you're using (see Tools/Options/Folders/Instrument Trees/Explore..., and look for the file with the same name as in the title of the window that shows when you click 'Predefined Instruments' in the Staff Properties/Instruments)
Thanks

Re: MIXER BOARD

Reply #4 – 2024-10-09 12:54 pm

Quote from: Michael W. Powell – 2024-10-09 12:26 pm

I am also getting a similar error as Lawrie.

Hi Michael,
When you go to Tools/Options/Folders, what do you see in the column 'Location' on the line 'Instrument Trees:'?
Thanks

Re: MIXER BOARD

Reply #5 – 2024-10-09 01:02 pm

Hi Opagust,

I see :program:\itrees

Re: MIXER BOARD

Reply #6 – 2024-10-09 02:21 pm

Quote from: Opagust – 2024-10-09 12:49 pm

Hi Lawrie,
That error occurs when reading the instrument tree.
Can you send me the itree file you're using (see Tools/Options/Folders/Instrument Trees/Explore..., and look for the file with the same name as in the title of the window that shows when you click 'Predefined Instruments' in the Staff Properties/Instruments)
Thanks

itree attached - it's pretty big and convoluted...

Re: MIXER BOARD

Reply #7 – 2024-10-09 03:08 pm

Quote

itree attached - it's pretty big and convoluted...

Hi Lawrie,
Can you change the '-' into '=' in the following lines of your itree file and try it again:
Ped Posaune 16, Prinzipal 16+8, Oktave 4-50
Ped Montre 16, Prinzipal 8, Prestant 4, Oktave 2-67

Re: MIXER BOARD

Reply #8 – 2024-10-09 03:35 pm

Hi Gust,
done and same error...

I did a little experimenting and some of my older, and much simpler, itrees seem OK.

What kind of errors in the file should I be looking for?

FWIW I should probably simplify my itree anyway - many of the sections are no longer in use.

Re: MIXER BOARD

Reply #9 – 2024-10-09 04:26 pm

Same problem.

Re: MIXER BOARD

Reply #10 – 2024-10-09 08:40 pm

Quote from: Lawrie Pardy – 2024-10-09 03:35 pm

Hi Gust,
done and same error...

I did a little experimenting and some of my older, and much simpler, itrees seem OK.

What kind of errors in the file should I be looking for?

FWIW I should probably simplify my itree anyway - many of the sections are no longer in use.

Instrument lines in a itree file consist of the name of the instrument and the patch number, separated by a "=" sign.
The program crashed on a line where the separator was a "-" instead of a "=".
I can eventually change the program to skip lines not containing a "=".

Re: MIXER BOARD

Reply #11 – 2024-10-09 08:50 pm

Quote from: Michael W. Powell – 2024-10-09 01:02 pm

Hi Opagust,

I see :program:\itrees

Hi Michael,

If you select that line and click 'Explore...':

Do you see any files with extension ".nwcitree?
What is the full path of that folder?

Re: MIXER BOARD

Reply #12 – 2024-10-09 11:17 pm

Quote from: Opagust – 2024-10-09 08:40 pm

Instrument lines in a itree file consist of the name of the instrument and the patch number, separated by a "=" sign.
The program crashed on a line where the separator was a "-" instead of a "=".
I can eventually change the program to skip lines not containing a "=".

Significant parts of that itree include lines that have transpositions, some of which are negative.
E.G.
Acoustic Guitar (nylon)=24,Trans(-12)

Could this be the problem?

Re: MIXER BOARD

Reply #13 – 2024-10-10 02:07 am

Hi Opagust,

For me the full path would be "C:\Program Files (x86)\Noteworthy Software\NoteWorthy Composer 2\itrees

Re: MIXER BOARD

Reply #14 – 2024-10-10 08:12 am

Quote from: Lawrie Pardy – 2024-10-09 11:17 pm

Quote from: Opagust – 2024-10-09 08:40 pm
Instrument lines in a itree file consist of the name of the instrument and the patch number, separated by a "=" sign.
The program crashed on a line where the separator was a "-" instead of a "=".
I can eventually change the program to skip lines not containing a "=".
Significant parts of that itree include lines that have transpositions, some of which are negative.
E.G.
Acoustic Guitar (nylon)=24,Trans(-12)

Could this be the problem?

I realise a itree is a bit more complicated than I thought

. I now discovered the full explanation in the sample.nwcitree

. I'm going to study that first.

Re: MIXER BOARD

Reply #15 – 2024-10-21 09:28 pm

Hi Gust,
I've been wondering if there's any movement here?

Re: MIXER BOARD

Reply #16 – 2024-10-22 08:31 am

Quote from: Lawrie Pardy – 2024-10-21 09:28 pm

Hi Gust,
I've been wondering if there's any movement here?

Don't worry, it just has dropped a few places on my priority list.

Re: MIXER BOARD

Reply #17 – 2024-10-22 11:31 am

All good, I was just curious as I can see this tool as a real winner - at least for me

I'll be patient mate.

Re: MIXER BOARD

Reply #18 – 2024-10-23 11:42 am

Version 1.1 is available in
https://www.opagust.be/content/mixer-board

Re: MIXER BOARD

Reply #19 – 2024-10-23 01:18 pm

Hi Gust,
just installed and tried the new version on a file I'm working on - seems to run fine, bu-ut - my changes weren't saved.
On clicking OK the program exited and I got the attached error.
I tried a simple, single staff file and it seemed to save fine.
Then I tried a different, more complex piece and got the missing clef error attached when running the program. It never actually opened. Interesting thing is there actually IS a clef on the staff, but it's not the first element.
Next I created a very simple test file using the piano template - just 2 bars on both staves. With clef, key sig. and time sig. of course. This also seemed to work fine although I did get a warning message saying the command was irreversible (I hadn't saved the file at all as it was a test).

On a different tack, there is a typo on the button at the bottom of each channel - the word "Predifined" should be "Predefined"

Would you like me to email you some files that failed?

Re: MIXER BOARD

Reply #20 – 2024-10-23 02:57 pm

Quote from: Lawrie Pardy – 2024-10-23 01:18 pm

Would you like me to email you some files that failed?

Yes, Lawrie, I would like that.
Remark: I can't open your first attachment 'MixerBoard-1-1-Problem.png'.

Re: MIXER BOARD

Reply #21 – 2024-10-23 03:18 pm

Quote from: Opagust – 2024-10-23 02:57 pm

Remark: I can't open your first attachment 'MixerBoard-1-1-Problem.png'.

I can, but there is little to see. Just stdout selected and "error" above "stdin".

Re: MIXER BOARD

Reply #22 – 2024-10-23 10:14 pm

Hi Gust,
can you PM me with your email address please?

Re: MIXER BOARD

Reply #23 – 2024-10-24 03:50 am

Hi Opagust,

Thanks for getting this posted. I've had a chance to download the latest version (1.1) but haven't had much of a chance to test it out yet. I did get it to work, I think, sort of.

When I run the tool I initially get the Error message STDOUT but no text telling what the error is. Shortly after getting this message the mixer board does come up. All of the staves show up and I am able to change things like Volume, Instrument, Bank, MIDI Channel, etc., but none of the changes that I make are saved when I click on the OK button.

Just wondering with the STDOUT if there is an actual error or issue connect with not being able to save or if it's safe to ignore the message because the mixer comes up and if there is another way to save any changes I make?

Thanks.

Re: MIXER BOARD

Reply #24 – 2024-10-24 07:26 am

I forgot to mention one thing in the install instructions: you have to check the box 'Long Task Handling'.
That will avoid the ERROR screen.

Re: MIXER BOARD

Reply #25 – 2024-10-24 11:33 am

Quote from: Opagust – 2024-10-24 07:26 am

I forgot to mention one thing in the install instructions: you have to check the box 'Long Task Handling'.
That will avoid the ERROR screen.

Hi Gust,
thanks for that - it fixed the problem I first encountered, but the other one is still to be resolved.

There will be 2 songs in your email shortly.

Re: MIXER BOARD

Reply #26 – 2024-10-24 01:27 pm

Hi Opagust,

While I will continue to test drive the tool, I am reporting that so far is seems to be working as advertised after checking the box 'Long Task Handling'. I was able to make a change in the mixer and have it saved to the file. I can see where this is going to be very handy and one of my "go to" tools that I will use frequently.

Thanks again for your work on this and speedy turnaround!

Re: MIXER BOARD

Reply #27 – 2024-10-25 09:20 am

Version 1.1.01 is now on https://www.opagust.be/content/mixer-board, in which the 'Missing Clef' error is suppressed for grace notes.

Re: MIXER BOARD

Reply #28 – 2024-10-25 12:32 pm

Seems fine thanks Gust - I can see this tool getting a bit of a workout at times.

Re: MIXER BOARD

Reply #29 – 2024-10-26 09:05 am

Hi Gust,
just discovered that anything that's on channel 10 or greater shows channel 10 in the interface.

More to the point, channels greater than 10 cannot be set in the interface.

When I muted a part on channel 12, even though it was showing channel 10 in the interface it successfully muted and remained on channel 10 12.

Lawrie

edit in italics

Re: MIXER BOARD

Reply #30 – 2024-10-26 08:15 pm

Quote from: Lawrie Pardy – 2024-10-26 09:05 am

Hi Gust,
just discovered that anything that's on channel 10 or greater shows channel 10 in the interface.

More to the point, channels greater than 10 cannot be set in the interface.

When I muted a part on channel 12, even though it was showing channel 10 in the interface it successfully muted and remained on channel 10.

Lawrie

Oops

I assumed the maximum channel number = 10.
Correction (-> 16) in version1.1.02
I also added a help text.

Re: MIXER BOARD

Reply #31 – 2024-10-27 01:00 am

Hi mate, you're gonna get sick of hearing from me...

Typo in the help text: "NWX" in the last section.

Re: MIXER BOARD

Reply #32 – 2024-10-30 08:45 am

There's now a new tool available that extends and replaces this mixer board: STAVES PROPERTIES