Skip to main content ↑ ↓
Topic: Deleting tempo (Read 12445 times) previous topic - next topic

Deleting tempo

I haven't used Noteworthy all that much, but am just starting to get into it. I composed one piece and added a tempo, then discovered it was too fast and wanted to delete it and insert a slower temo, but everything I try seem to delete a note instead. How do I do this, please?

Re: Deleting tempo

Reply #1 –
The expression anchor is the key to working with objects that do not preserve width. You can also quickly select the nearest tempo by moving before the item, and using Ctrl+F, which is Edit->Find. In the Find box, enter "|Tempo" without the quotes. This will then select the next tempo found. You can then press Delete to remove it, or Edit->Properties to adjust it.

See also:

FAQ - Existing notes or symbols - change or delete

Re: Deleting tempo

Reply #2 –
Alongside the tempo marking, you will either see an anchor or a small arrow or mark.

These objects are grab items that immediately precede an object. If you select that mark by the tempo, that is the same as selecting the tempo itself.

Select the mark and then press delete.

For info, you can change the shape and size of this mark by going to Tools options Editor and selecting custom Expression Anchor and then changing the size if you want.

This type of mark will also be used to select items such as text (not lyrics) or dynamic variances etc that you might have put in.
Rich.

Re: Deleting tempo

Reply #3 –

   It would be good if you could search backwards as well as forwards.  This has, I think, been on the Wish List for some time, but has not been enabled.

   MusicJohn, 19/Jun/12

Re: Deleting tempo

Reply #4 –
Quote from: Richard Woodroffe –
These objects are grab items that immediately precede an object. If you select that mark by the tempo, that is the same as selecting the tempo itself. [emphasis added]

Not quite. An anchor precedes an object when justification is set to "left."  When justification is set to "right," it follows the object, and when justification is set to "center" it shows up in the middle of the object. AFAIK, the default justification for all objects is "left." But if a user changes that, the statement quoted here might confuse him.

Sorry, Rich. Just trying to be complete....

Bill

Re: Deleting tempo

Reply #5 –
Quote from: William Ashworth –
Sorry, Rich. Just trying to be complete....

No need for sorry - very good point. Since Rayc admits to being a new to NoteWorthy and he didn't know how to grab hold of the mark to delete tempo, it is unlikely he would have done this ....  but for others reading and for future reference, very valid.

I also agree with John that a backwards search woud be very useful.   The times that I've wanted to know where a "an effect" comes from and had to go back to the beginning and search forward whilst having in mind the measure number that's giving the issue.
Rich.

Re: Deleting tempo

Reply #6 –
And of course, once one has selected the tempo (or MPC or text item or whatever), instead of deleting it, you can right-click it and select Properties to change the tempo instead of inserting another tempo mark.

Re: Deleting tempo

Reply #7 –
Quote from: Milton –
And of course, once one has selected the tempo (or MPC or text item or whatever), instead of deleting it, you can right-click it and select Properties

or press <alt><enter>
 

Re: Deleting tempo

Reply #8 –
Another suggestion for when writing multi-staff works (orchestral, choral, etc) is to use a separate, single staff for all non-zero tempo controls.

For example, all numeric tempo values, fermatas, breath marks, accels, decels, etc could go on that single channel.  That makes them easier to find for editing.  If channels are in short supply the tempo staff could use for example channel 10.  When saving the finished work, the tempo staff would be hidden.

Re: Deleting tempo

Reply #9 –
While I understand the use of a specific staff for tempo controls, I don't see the need for a dedicated channel.
You can use whatever channel you want, already used or unused.
I just suggest to uncheck "Send Patch" and "Send Bank select" for that staff to avoid interferences.

Re: Deleting tempo

Reply #10 –
I have no preference for this but what I would recommend is that all tempo marks and any instruction that changes tempo are all confined to one specific staff, not necessarily dedicated.  Markings that that change tempi will not work unless they have a tempo mark before and after the change marking.

This applies to markings such as accel, rit, ral etc.

To see this in action, play this as is. Then move the accel marking to the first staff and play again.

Code: (nwc) [Select · Download]
!NoteWorthyComposer(2.5)
|Locale|ACP:1252
|Editor|ActiveStaff:1|CaretIndex:1|CaretPos:2
|SongInfo|Title:""|Author:"<Name>"|Lyricist:""|Copyright1:"Copyright © 2012 <Name>"|Copyright2:"All Rights Reserved"
|PgSetup|StaffSize:16|Zoom:4|TitlePage:Y|JustifyVertically:Y|PrintSystemSepMark:N|ExtendLastSystem:N|DurationPadding:Y|PageNumbers:0|StaffLabels:None|BarNumbers:None|StartingBar:1
|Font|Style:StaffItalic|Typeface:"Times New Roman"|Size:10|Bold:Y|Italic:Y|CharSet:0
|Font|Style:StaffBold|Typeface:"Times New Roman"|Size:8|Bold:Y|Italic:N|CharSet:0
|Font|Style:StaffLyric|Typeface:"Times New Roman"|Size:7|Bold:N|Italic:N|CharSet:0
|Font|Style:PageTitleText|Typeface:"Times New Roman"|Size:24|Bold:Y|Italic:N|CharSet:0
|Font|Style:PageText|Typeface:"Times New Roman"|Size:12|Bold:N|Italic:N|CharSet:0
|Font|Style:PageSmallText|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User1|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User2|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User3|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User4|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User5|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User6|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|PgMargins|Left:1.27|Top:1.27|Right:1.27|Bottom:1.27|Mirror:N
|AddStaff|Name:"Staff"|Group:"Standard"
|StaffProperties|EndingBar:Section Close|Visible:Y|BoundaryTop:12|BoundaryBottom:12|Lines:5|Color:Default
|StaffProperties|Muted:N|Volume:127|StereoPan:64|Device:0|Channel:1
|StaffInstrument|Trans:0|DynVel:10,30,45,60,75,92,108,127
|Tempo|Tempo:120|Pos:12
|Clef|Type:Treble
|TimeSig|Signature:4/4
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Bar
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Bar
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Bar
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Bar
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Bar
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Bar
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Bar
|Tempo|Tempo:240|Pos:12
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Bar
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Note|Dur:4th|Pos:0
|Bar
|AddStaff|Name:"Staff-1"|Group:"Standard"
|StaffProperties|EndingBar:Section Close|Visible:Y|BoundaryTop:10|BoundaryBottom:10|Lines:5|Color:Default
|StaffProperties|Muted:N|Volume:127|StereoPan:64|Device:0|Channel:2
|StaffInstrument|Trans:0|DynVel:10,30,45,60,75,92,108,127
|Clef|Type:Treble
|TimeSig|Signature:4/4
|TempoVariance|Style:Accelerando|Pos:7
|Rest|Dur:Whole
|Bar
|RestMultiBar|NumBars:8|PrintOnce:Y|WhenHidden:ShowBars,ShowRests
!NoteWorthyComposer-End

Rich.

Re: Deleting tempo

Reply #11 –
Quote
any instruction that changes tempo are all confined to one specific staff

Absolutely!
I hate to have to search all the staves to find which one contains the one I'm interested in that specific moment.

Re: Deleting tempo

Reply #12 –
Another reason for keeping all Fermatas and Breath Marks with non-zero values on a single staff:

   ...  It simplifies the job of running Rick's Fermata/Breath_Mark tool before exporting from NWC to MIDI.

Currently NWC doesn't have a built-in 'smart' export of Fermata and Breath Mark values.  They're ignored in the export.  (It's been requested many times in forums, and is in the Wish List.)  Rick's program converts them to an Expression format which is supported in the export to MIDI.

Keeping them together on one staff makes it easier to do that job.

Joe

Re: Deleting tempo

Reply #13 –
Quote from: Joseph Roberts –
Another suggestion for when writing multi-staff works (orchestral, choral, etc) is to use a separate, single staff for all non-zero tempo controls.

For example, all numeric tempo values, fermatas, breath marks, accels, decels, etc could go on that single channel.  That makes them easier to find for editing.  If channels are in short supply the tempo staff could use for example channel 10.  When saving the finished work, the tempo staff would be hidden.

When printing parts, the above info as well as rehearsal symbols should be seen by everybody.  Hide the rests and barlines so the part being printed can be layered into the tempo channel.
Since 1998

Re: Deleting tempo

Reply #14 –
Quote from: Warren Porter –
When printing parts, the above info as well as rehearsal symbols should be seen by everybody.  Hide the rests and barlines so the part being printed can be layered into the tempo channel.

Yes, indeed.  I didn't mention that because I thought it was covered in Richard's reply (#10 above).

Tempo symbols like accel, rit, etc can and should be shown in the score for the players or singers on their staves  As Richard pointed out, if there is not a numeric tempo value assigned before/after those controls, they have no effect on the actual timing.  Likewise, fermatas and breath marks with zero numeric value can and should be shown on the various staves for the same reason.  They're there visually for the players/singers to see (and follow the conductor/leader as necessary).

The actual numeric tempo values affecting accel/rit, and the actual timing values of fermatas and breath marks, can be placed all on one staff.

The main point is, keeping all elements whose values affect the control of timing on a single staff simplifies the editing of the score later on.  It's easier to find a drink if there's the one bucket to dip the cup into.

Hoping it helps to explain it better.

Joe

Re: Deleting tempo

Reply #15 –
I thought I'd toss in for any future googlers who stumble across this:

I found it extremely hard to grab onto the anchor for whatever reason, so here's the solution I found.

Go to the Find menu (Ctrl-F or Edit->Find) and then you can type in "|Tempo" as above, if you're looking specifically for tempo, or just the "|" symbol if you just want to grab anything.

See, if you use the | symbol in Find, it finds *everything.* So then you just click before the thing you need to grab (whether tempo, or dynamic, or whatever) and press F3 to go to the next thing it finds from your last search.

So I just leave it on searching for |. That means I can just click in front of whatever I'm trying to grab and hit F3, and voila, it selects it. I hit delete, and if it deletes the wrong thing, whoops, I ctrl-Z, hit F3 again to select the *next* thing, and try again.

Way, way easier than trying to grab that blasted anchor. I don't know why the anchor almost never works for me...

Re: Deleting tempo

Reply #16 –
Just position the cursor before or after the anchor and press <Shift+Arrow> to select it.  Fast and easy.
For the most part, it's much, MUCH easier to ignore the mouse in NWC and just use the keyboard.
<Ctrl+Arrow> moves a bar at a time
<Shift+Ctrl+Arrow> selects a bar at a time, repeat the <Arrow> press while holding <Shift+Ctrl> to select multiple bars...
Keyboard shortcuts are in the help and the manual.
I plays 'Bones, crumpets, coronets, floosgals, youfonymums 'n tubies.

Re: Deleting tempo

Reply #17 –
I agree with Lawrie, but did you consider "Tools -> Options -> Editor -> My expression anchor size"
and "(ditto) -> Object anchor size"?