Skip to main content
Topic: Master repeat open prints as Local repeat open (Read 4984 times) previous topic - next topic

Master repeat open prints as Local repeat open

Hello all,
Is this not odd? On screen, there are only Master repeat opens and closes. In Preview and on paper, the last Master repeat open one is a Local repeat open!

Re: Master repeat open prints as Local repeat open

Reply #1
Oh... Problem solved, for the moment. If I put a spacer in just before the master repeat opens that look like local repeat opens, preview and print are fine.

Re: Master repeat open prints as Local repeat open

Reply #2
Oh... Problem solved, for the moment. If I put a spacer in just before the master repeat opens that look like local repeat opens, preview and print are fine.


You're right.  But why should a spacer change how a repeat open shows up on screen in the first place ?  Is this normal ? Should this be happening at all ?

Re: Master repeat open prints as Local repeat open

Reply #3
Rob,
you had a MIS-match of spacers:

Both SA and TB had spacers,
but not the next 2 staffs.

Adding similar spacers to BOTH the bottom staffs, cures the problem.
(Adding a spacer to only one of the bottom staffs, cures the problem for that staff only.)

Why you get the difference, is beyond me.

Re: Master repeat open prints as Local repeat open

Reply #4
That is exactly how I solved the problem, Haymo. But it is still odd.

A spacer should add space, it should not change anything.

Re: Master repeat open prints as Local repeat open

Reply #5
An old bug. Replace the spacers with text and it can be reproduced in NWC 2.0.
The attachment was created in NWC 2.0
Registered user since 1996