NoteWorthy Composer Forum

Forums => General Discussion => Topic started by: Rob den Heijer on 2012-04-09 12:44 pm

Title: Master repeat open prints as Local repeat open
Post by: Rob den Heijer on 2012-04-09 12:44 pm
Hello all,
Is this not odd? On screen, there are only Master repeat opens and closes. In Preview and on paper, the last Master repeat open one is a Local repeat open!
Title: Re: Master repeat open prints as Local repeat open
Post by: Rob den Heijer on 2012-04-09 12:50 pm
Oh... Problem solved, for the moment. If I put a spacer in just before the master repeat opens that look like local repeat opens, preview and print are fine.
Title: Re: Master repeat open prints as Local repeat open
Post by: melismata on 2012-04-09 02:19 pm
Oh... Problem solved, for the moment. If I put a spacer in just before the master repeat opens that look like local repeat opens, preview and print are fine.


You're right.  But why should a spacer change how a repeat open shows up on screen in the first place ?  Is this normal ? Should this be happening at all ?
Title: Re: Master repeat open prints as Local repeat open
Post by: Haymo on 2012-04-09 03:07 pm
Rob,
you had a MIS-match of spacers:

Both SA and TB had spacers,
but not the next 2 staffs.

Adding similar spacers to BOTH the bottom staffs, cures the problem.
(Adding a spacer to only one of the bottom staffs, cures the problem for that staff only.)

Why you get the difference, is beyond me.
Title: Re: Master repeat open prints as Local repeat open
Post by: Rob den Heijer on 2012-04-09 05:08 pm
That is exactly how I solved the problem, Haymo. But it is still odd.

A spacer should add space, it should not change anything.
Title: Re: Master repeat open prints as Local repeat open
Post by: Rick G. on 2012-04-09 10:07 pm
An old bug. Replace the spacers with text and it can be reproduced in NWC 2.0.
The attachment was created in NWC 2.0