Skip to main content ↑ ↓
Topic: Hiding objects on a staff (Read 2373 times) previous topic - next topic

Hiding objects on a staff

Without going through the process of hidden-played, muted-displayed staves for every part, is there a way to make the following look like pentuplet 16ths by hiding the top beam and the dots on 32nd notes?
Code: (nwc) [Select · Download]
!NoteWorthyComposerClip(2.751,Single)
|Key|Signature:F#,C#,G#,D#|Tonic:E
|Note|Dur:32nd,Dotted,Slur|Pos:8|Opts:Stem=Down,Beam=First
|Note|Dur:32nd,DblDotted,Slur|Pos:5|Opts:Stem=Down,Beam
|Note|Dur:32nd,Dotted,Slur|Pos:3|Opts:Stem=Down,Beam
|Note|Dur:32nd,DblDotted,Slur|Pos:1|Opts:Stem=Down,Beam
|Note|Dur:32nd,Dotted,Slur|Pos:-2|Opts:Stem=Down,Beam=End
|Note|Dur:32nd,Dotted,Slur|Pos:-6|Opts:Stem=Down,Beam=First
|Note|Dur:32nd,DblDotted,Slur|Pos:-2|Opts:Stem=Down,Beam
|Note|Dur:32nd,Dotted,Slur|Pos:1|Opts:Stem=Down,Beam
|Note|Dur:32nd,DblDotted,Slur|Pos:3|Opts:Stem=Down,Beam
|Note|Dur:32nd,Dotted|Pos:5|Opts:Stem=Down,Beam=End
|Note|Dur:32nd,Dotted,Slur|Pos:8|Opts:Stem=Down,Beam=First
|Note|Dur:32nd,DblDotted,Slur|Pos:5|Opts:Stem=Down,Beam
|Note|Dur:32nd,Dotted,Slur|Pos:3|Opts:Stem=Down,Beam
|Note|Dur:32nd,DblDotted,Slur|Pos:1|Opts:Stem=Down,Beam
|Note|Dur:32nd,Dotted,Slur|Pos:-2|Opts:Stem=Down,Beam=End
|Note|Dur:32nd,Dotted,Slur|Pos:-6|Opts:Stem=Down,Beam=First
|Note|Dur:32nd,DblDotted,Slur|Pos:-2|Opts:Stem=Down,Beam
|Note|Dur:32nd,Dotted,Slur|Pos:1|Opts:Stem=Down,Beam
|Note|Dur:32nd,DblDotted,Slur|Pos:3|Opts:Stem=Down,Beam
|Note|Dur:32nd,Dotted|Pos:5|Opts:Stem=Down,Beam=End
|Bar
!NoteWorthyComposerClip-End

Thanks in advance.
Since 1998

Re: Hiding objects on a staff

Reply #1 –
Isn't setting "Extra Dot Spacing" to -1 (minus one) for alle notes sufficient?

Edit: Sorry, this will not remove the top beam :-( - I think there's no way to do this. The only idea I have is

Code: (nwc) [Select · Download]
!NoteWorthyComposer(2.751)
|Editor|ActiveStaff:2|CaretIndex:1|CaretPos:3
|SongInfo|Title:""|Author:"<Name>"|Lyricist:""|Copyright1:"Copyright © 2021 <Name>"|Copyright2:"All Rights Reserved"
|PgSetup|StaffSize:16|Zoom:4|TitlePage:Y|JustifyVertically:Y|PrintSystemSepMark:N|ExtendLastSystem:N|DurationPadding:Y|PageNumbers:0|StaffLabels:None|BarNumbers:None|StartingBar:1
|Font|Style:StaffItalic|Typeface:"Times New Roman"|Size:10|Bold:Y|Italic:Y|CharSet:0
|Font|Style:StaffBold|Typeface:"Times New Roman"|Size:8|Bold:Y|Italic:N|CharSet:0
|Font|Style:StaffLyric|Typeface:"Times New Roman"|Size:7.2|Bold:N|Italic:N|CharSet:0
|Font|Style:PageTitleText|Typeface:"Times New Roman"|Size:24|Bold:Y|Italic:N|CharSet:0
|Font|Style:PageText|Typeface:"Times New Roman"|Size:12|Bold:N|Italic:N|CharSet:0
|Font|Style:PageSmallText|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User1|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User2|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User3|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User4|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User5|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|Font|Style:User6|Typeface:"Times New Roman"|Size:8|Bold:N|Italic:N|CharSet:0
|PgMargins|Left:1.27|Top:1.27|Right:1.27|Bottom:1.27|Mirror:N
|AddStaff|Name:"Staff"|Group:"Standard"
|StaffProperties|EndingBar:Section Close|Visible:Y|BoundaryTop:12|BoundaryBottom:12|Lines:5|Color:Default
|StaffProperties|Muted:N|Volume:127|StereoPan:64|Device:0|Channel:1
|StaffInstrument|Trans:0|DynVel:10,30,45,60,75,92,108,127
|Spacer|Width:50
|Key|Signature:F#,C#,G#,D#|Tonic:E
|Note|Dur:16th,Dotted,Slur|Pos:8|Opts:Stem=Down,Beam=First,XDotSpace=-1
|Note|Dur:16th,DblDotted,Slur|Pos:5|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,Dotted,Slur|Pos:3|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,DblDotted,Slur|Pos:1|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,Dotted,Slur|Pos:-2|Opts:Stem=Down,Beam=End,XDotSpace=-1
|Note|Dur:16th,Dotted,Slur|Pos:-6|Opts:Stem=Down,Beam=First,XDotSpace=-1
|Note|Dur:16th,DblDotted,Slur|Pos:-2|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,Dotted,Slur|Pos:1|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,DblDotted,Slur|Pos:3|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,Dotted|Pos:5|Opts:Stem=Down,Beam=End,XDotSpace=-1
|Note|Dur:16th,Dotted,Slur|Pos:8|Opts:Stem=Down,Beam=First,XDotSpace=-1
|Note|Dur:16th,DblDotted,Slur|Pos:5|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,Dotted,Slur|Pos:3|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,DblDotted,Slur|Pos:1|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,Dotted,Slur|Pos:-2|Opts:Stem=Down,Beam=End,XDotSpace=-1
|Note|Dur:16th,Dotted,Slur|Pos:-6|Opts:Stem=Down,Beam=First,XDotSpace=-1
|Note|Dur:16th,DblDotted,Slur|Pos:-2|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,Dotted,Slur|Pos:1|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,DblDotted,Slur|Pos:3|Opts:Stem=Down,Beam,XDotSpace=-1
|Note|Dur:16th,Dotted|Pos:5|Opts:Stem=Down,Beam=End,XDotSpace=-1
|Bar
|AddStaff|Name:"Staff-1"|Group:"Standard"
|StaffProperties|EndingBar:Section Close|Visible:Y|BoundaryTop:10|BoundaryBottom:10|Lines:5|Color:Default
|StaffProperties|Muted:N|Volume:127|StereoPan:64|Device:0|Channel:2
|StaffInstrument|Trans:0|DynVel:10,30,45,60,75,92,108,127
|Key|Signature:F#,C#,G#,D#|Tonic:E
|Note|Dur:4th|Pos:-1
|Rest|Dur:4th|Visibility:Never
|Note|Dur:4th|Pos:3
|Rest|Dur:4th|Visibility:Never
|Note|Dur:4th|Pos:4
|Rest|Dur:4th|Visibility:Never
|Note|Dur:4th|Pos:3
|Rest|Dur:4th|Visibility:Never
|Bar
!NoteWorthyComposer-End

(oops - missing clefs. Assume that the lower staff has a bass clef ;) )

Regards
Harald

Re: Hiding objects on a staff

Reply #2 –
I'm not very skilled with the use of Beam.hmm, but perhaps it could be made to do the beams, by setting the stem lengths to 0 for all notes?

For some time I have been considering a user object-based solution to n-tuplets. The approach that made the most sense to me would be to create a series of grace notes that correspond to the desired ntuplets, followed by a rest whose value is the total for the ntuplet. Then you mute the grace notes and make them and the rest invisible, and you put the object in front of them. The object would draw the notes, stems and beams, and could potentially play them also.  Does this idea/approach make any sense?

(I held off on doing this in hopes that the next version of NWC would have support for ntuplets. And also because I rarely, if ever, use >3 tuplets.)

Re: Hiding objects on a staff

Reply #3 –
Sorry, no beam...
Code: (nwc) [Select · Download]
!NoteWorthyComposerClip(2.751,Single)
|Key|Signature:F#,C#,G#,D#|Tonic:E
|RestChord|Dur:32nd,Dotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:-4
|RestChord|Dur:32nd,DblDotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:-3
|RestChord|Dur:32nd,Dotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:-2
|RestChord|Dur:32nd,DblDotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:-1
|RestChord|Dur:32nd,Dotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:0
|RestChord|Dur:32nd,Dotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:-1
|RestChord|Dur:32nd,DblDotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:-2
|RestChord|Dur:32nd,Dotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:-3
|RestChord|Dur:32nd,DblDotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:-4
|RestChord|Dur:32nd,Dotted|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th|Pos2:-5
|RestChord|Dur:32nd,Dotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:0
|RestChord|Dur:32nd,DblDotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:1
|RestChord|Dur:32nd,Dotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:2
|RestChord|Dur:32nd,DblDotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:3
|RestChord|Dur:32nd,Dotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:4
|RestChord|Dur:32nd,Dotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:3
|RestChord|Dur:32nd,DblDotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:2
|RestChord|Dur:32nd,Dotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:1
|RestChord|Dur:32nd,DblDotted,Slur|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th,Slur|Pos2:0
|RestChord|Dur:32nd,Dotted|Opts:Stem=Down,ArticulationsOnStem,HideRest|Dur2:16th|Pos2:-1
!NoteWorthyComposerClip-End

Quote
in hopes that the next version of NWC would have support for ntuplets
  :(
 

Re: Hiding objects on a staff

Reply #4 –
Mike, I'm holding out hope that you might be allowed to do the next version.