Skip to main content ↑ ↓
Topic: Sustain Pedal has no effect on playback (Read 4609 times) previous topic - next topic

Sustain Pedal has no effect on playback

The Insert | Sustain Pedal looks nice on the output, but as
far as I can hear, it has no effect on the playback. Am I
right, and (if so) will it get fixed.

Why does it have no Preserve Width and Hide when Printing
options? Every insertable marking should have the same options.
Dynamic Variance also does not have Hide when Printing.

Re: Sustain Pedal has no effect on playback

Reply #1 –
Pedal works just fine on all my midi cards/boxes.
What is your midi device?

I agree, Preserve Width and Hide When Printing should be on it, at least for consistency's sake. Don't forget Staff Position.

Andrew

Re: Sustain Pedal has no effect on playback

Reply #2 –
I have a notebook computer with a built in sound card. I would guess it is Sound Blaster compatible, but I don't know. Maybe there is a problem with the midi driver.

Re: Sustain Pedal has no effect on playback

Reply #3 –
It may be that that particular card doesn't do sustain pedals!? Some of the cheaper cards are pretty trashy.

A
 

Re: Sustain Pedal has no effect on playback

Reply #4 –
I used a bunch of stuff to record MIDI (I haven't tried
NOTEWORTHY yet)
I have the same problem. I put a few files on a homepage
(http://www.infonet.st-johns.nf.ca/providers/green/songs.html)
but they sound terrible with my PINE (I had two, ISA and PCI)
sound cards, but much better (with pedal)through an external
MIDI device (Roland CM-300). What we need is a workaround
- a program to pre-process the pedal signals, replacing
them with delayed note off signals. Does anyone know of any
program that already does this? It seems that a little
utility in QBASIC would suffice (an educational project for
a student?)