Skip to main content ↑ ↓
Topic: Audio recording nworthy files (Read 7152 times) previous topic - next topic

Audio recording nworthy files

When I connect the headphone out socket on the computer loudspeaker to the microphone input of the tape recorder, noteworthy files make dismal recordings.
Is it possible to fit something in between to get a good recording? If so where do I get it?

Re: Audio recording nworthy files

Reply #1 –
Connecting a headphone output into a MIC input is just asking for distortion. If you want to make a tape, at a minimu, you should take the line level out of your sound card (if it has one - most do these days) and connect it to a line level input on a tape deck. On many sound cards, you might require a 1/8" adapter cable to convert to stereo audio cables.

Re: Audio recording nworthy files

Reply #2 –
If your tape deck doesn't have line-in jacks (as is the case with many low-end "blasters"), you can get an attenuator cable from Radio Shack that reduces the level by about 40 decibels, allowing you to patch from your Line Out (or speaker/headphone out) on your soundcard to the mic input of the tape recorder. Still won't give great recordings, but at least you won't have all that clipping distortion.