Text only | Text with Images

NoteWorthy Composer Forum

Forums => General Discussion => Topic started by: Allan Micksch on 2021-09-27 04:14 pm

Title: Support for Error: Missing Font NWC2STDA
Post by: Allan Micksch on 2021-09-27 04:14 pm
Sent email to support@noteworthycompser.com last Tuesday about this error but have not received a reply even to acknowledge receipt of my email.  The file exists in the Fonts folder but the nwc2.exe can't seem to find it.
Title: Re: Support for Error: Missing Font NWC2STDA
Post by: hmmueller on 2021-09-27 05:39 pm
Newly installed NWC2? Or has been used, and now suddenly does not work?
And: Can you change the main font (Alt-F-G -> tab "Fonts" -> "Change" -> "Notation Typeface", select a different one there) and check whether it works?

H.M.
Title: Re: Support for Error: Missing Font NWC2STDA
Post by: Flurmy on 2021-09-27 05:41 pm
Which Font foder?
Windows\Fonts or NoteWorthy Composer 2\Fonts?

NoteWorthy Composer 2\Fonts contains fonts.ini which contains the lines:
Quote
; ----------------------------------------------------------------------------
; The [Fonts] section contains a list of fonts that will be dynamically loaded
; when necessary.
; ----------------------------------------------------------------------------
...
Quote
NWC2STDA=NWC2STDA.ttf
Title: Re: Support for Error: Missing Font NWC2STDA
Post by: Allan Micksch on 2021-09-28 03:10 pm
saved all to usb
downloaded demo
copied demo font folder to usb
copied usb nwc2.exe to demo
both work

Still no response to my email.
Title: Re: Support for Error: Missing Font NWC2STDA
Post by: Lawrie Pardy on 2021-09-28 03:30 pm
Hi Allan,
this thread might be helpful if something happens again.  The last reply in the thread is from Noteworthy:
https://forum.noteworthycomposer.com/?topic=5279.msg33944#msg33944

I don't know why support hasn't responded.
Title: Re: Support for Error: Missing Font NWC2STDA
Post by: hmmueller on 2021-09-28 04:09 pm
Quote from: Allan Micksch –
saved all to usb
downloaded demo
copied demo font folder to usb
copied usb nwc2.exe to demo
both work

Still no response to my email.
Could not resist ... https://youtu.be/7Z-fZkyeS-I (https://youtu.be/7Z-fZkyeS-I) - maybe "fair use" according to the law, but - ok, I admit it: not fair in in the common sense of the word. And also not helpful.
(I'm always looking for lyrics - your posting is formatted so like a poem that it cries for being set to music - you'll get the full royalities when they start flowing!)

H.M.
Title: Re: Support for Error: Missing Font NWC2STDA
Post by: Opagust on 2021-09-28 07:36 pm
Hi Harald,

Could not resist!  ;D
Title: Re: Support for Error: Missing Font NWC2STDA
Post by: hmmueller on 2021-09-28 07:43 pm
Aren't the ...Germanic fonts in the standard install?? And which 12 user objects are those missing ones (my choral template has, nowadays, quite a handful of user objects on each staff; there being 12 staves, it seems that there are two of them that need to be installed ... as far as I know, all of them should be in the forum, but I might have used a modified local copy of some).

H.M.
Title: Re: Support for Error: Missing Font NWC2STDA
Post by: Lawrie Pardy on 2021-09-28 11:59 pm
Quote from: hmmueller –
Aren't the ...Germanic fonts in the standard install?? <snip>
Nope.  They were a later addition.  Although I have no objection to their inclusion in the installer should Eric choose to.

As a result you need to download the ChordFontSupplement from this page:
http://zoundz.pardyline.com.au

Direct download here:
http://zoundz.pardyline.com.au/SupportFiles/Fonts/ChordFontsDoSiGermanic.zip
Text only | Text with Images