Could someone please advise me? I purchased NWC2's use, believe it or not for one time use. I am to play harmonica along with a live singer and the sound track. I changed the song key to "G" and all plays great.
The problem is:
There are 3 verses along with chorus.
Only two verses play.
Note Worthy Support told me that "You just need to change the local repeat count from 2 to 3."
I don't know how and I don't have a keyboard. What can I do?
Thanks,
Larry
(Lkazorp)
You need to say how the verses end. Do they end with a master repeat bar line. Or do they end with a local repeat bar line.
If the barline at the end of the verses is a local repeat, it may have a number in brackets above the bar line. To alter this, highlight the bar line and then press ALT and ENTER. You will then see a repeat count box. Change this from 2 to 3 and press OK.
If it is a Master repeat then you will need to use special endings with the master repeat bar. Note that if you have a master repeat bar and no special ending, then you would get a repeat of only 2.
Go to immediately after the previoy bar line and then press the letter S. Select 1 and 2 for the special endings. This will now repeat a further time. You may need to alter the position of the special ending to suit the soneg but I hope this gives you an idea of what to do.
A couple of ways to repeat a section 3 times:
!NoteWorthyComposerClip(2.5,Single)
|Note|Dur:Half|Pos:0
|Bar|Style:LocalRepeatClose|Repeat:3
|Bar|Style:SectionOpen
|Note|Dur:Half|Pos:1
|Ending|Endings:1,2|Visibility:Never
|Bar|Style:MasterRepeatClose
!NoteWorthyComposerClip-End